Monthly Archives: May 2012

Miami Vinyl Liner Pool Repair

There are different types of swimming pools in Miami, and one popular type is the vinyl liner pool, whose name is derived from the presence of vinyl sheet covering the pool basin. Other types, like the gunite and shotcrete pool, use plaster.

 

What You Need to Know About Vinyl Liner Repair

 

Vinyl liner pools have sand underneath, and have floors that meet the walls. The walls are made of galvanized steel or thermoplastic. The wall panels have to be secured together and be supported by structures from behind, so that they will not collapse due to the pressure of the water. So, what would you do if you are in dire need of  pool repair in Miami for your Vinyl Liner pool? Read on so you’ll find out..

 

Miami Pool Repair

 

Vinyl liner swimming pools do not last forever. The first sign that your facility is getting old is when the liner bead is coming out of the track. This happens due to a few causes. The usual cause is the incorrect installation of the liner.

 
For instance, if the liner is too small or too big for the pool, the bead may pop out of the track. Another common mistake is putting the liner off center. Fortunately, this is easy to remedy. Heat from a blow dryer can stretch the liner and put it back in place. Some have tried boiling hot water to stretch the liner. If the bead keeps popping out, a liner lock can be the solution.
 

Vinyl Repair in Miami Safety Precautions

 
Safety precautions have to be observed when doing repairs. For instance, do not draw the hair dryer too near the vinyl, and don’t pick it up if it fell into the water—turn it off first. Make sure you unplug electrical equipment (pool filters and pumps) before servicing the facility. There are cases when you need to lower the water level to do repairs. Many owners consult pool repair professionals when dealing with such problems to avoid mistakes and accidents.
 

Another thing to look for is the color of the liner. After sometime, the color will fade due to the effects of the chemicals and the sun. Harsh chemicals you use on your pool can remove the plasticizers in time. Vinyl weakens when the material that keeps it tough wears off.

 

Liners may be resistant to punctures—to some extent. After sometime, liners can lose their toughness and become vulnerable to damaging elements. An old liner is prone to damage, but you can easily patch holes with patch kits.

 

Vinyl Liner Repair and Damages

 

Damage to the vinyl liner can lead to leaking. Sometimes, leaks cannot be detected visually. You can just observe the change in water levels to figure out possible leaking of water. If the water level in your facility goes down by more than an inch in a week, there is a possibility of a leakage. Leaks cannot be allowed to go on, because water spilling out of the basin can erode sand underneath the floor and create sinkholes. Leaking water can also corrode walls.

 

Although you may be tempted to empty the pool to fix the leaks, this is not the right recourse. The pressure of the water pushes the liner against the walls and the floor. Removing the water removes this pressure as well. This may cause wrinkles to appear on the liner. It also increases the likelihood of a wall collapse.

 
This is what you should do..
 

To avoid costly repairs, regular maintenance and cleaning should be done. Investing in a good filtration system and automatic pool cleaners is more than a good idea. You may also call your Miami pool repair specialist to take care of your Vinyl Liner at 305-9723474 today.

 

Want to know more about this topic? Read this article on Vinyl Liner Pool Repair.

Important Pool Care Tips for Your Miami Home

 

Above ground pools bring great fun and enjoyment for the whole family during the warm summer months. In order to maximize this enjoyment, it is important to care for and maintain your pool water and equipment properly.

This includes sanitizing the water properly with above ground swimming pool chemicals to eliminate bacteria build up, and keeping the water in proper balance.

Importance of Caring For Your Pool Water

The chemistry of your pool water is one of the most important factors of overall pool care. Maintaining proper water chemistry takes care of both the swimmers and the pool itself. There are some basic water components that must be maintained and kept in proper balance.

Total dissolved solids (TDS) is the measure of the total amount of dissolved material in the water, which is influenced by factors such as the pH, chlorine, water hardness, alkalinity, debris, and so forth, which all increase its level. The following are some of the most influential factors of TDS:

Total Hardness – This component refers to the amount of calcium and magnesium found in the pool water. This hardness must stay within an acceptable range, which can be measured with proper testing – for instance, test strips. If total hardness is too high, it will cause the water to become cloudy. On the other hand, if the total hardness is too low, then corrosion on pool equipment will occur.

pH– The pH level deals with the level of acidity or alkalinity of the pool water, which is measured on a scale of 1 (extremely acidic) to 14 (extremely alkaline). The ideal, neutral pH level is at 7. If it is too high, the water will cause skin and eye irritation on the swimmers. If this level is too low, it can also cause irritation to swimmers in addition to corroding pool fixtures and equipment.

Total Alkalinity– This level measures the amount of alkaline material found in the pool water, which buffers the water against changes in the pH level. If the total alkalinity level is too low, corrosion of the pool’s metal fixtures will occur. On the other hand, if the total alkalinity is too low, it can stain and weaken the pool’s vinyl liner.

Stabilizer– Your pool water needs to be kept clean and sanitized to prevent bacteria and infectious microorganisms to keep the swimmers safe. Two of the more common sanitizers are chlorine and bromine. In order to extend the life of your chlorine, stabilizers must be added to the water.

Keeping your pool water in proper balance is one of the most important things you can do for pool maintenance. As you can see, keeping various factors in proper balance can help to maintain healthy pool water, and also help to maintain your pool’s equipment to ensure a long life-span of the pool itself.

Sanitizing Your Pool Water

  • Sanitizing and keeping the water clean is a vital part of above ground swimming pool care. Two of the more common above ground swimming pool chemicals used to sanitize pool water include chlorine and bromine. These substances keep swimmers safe by preventing contraction of illnesses or infections within the water through the elimination of bacteria and harmful microorganisms.
  • Chlorine has been one of the most popular above ground swimming pool chemicals used to keep the water in the pool clean and kill contaminants. However, many people also commonly use bromine to sanitize their pool water, which is also very effective in keeping the water clean by getting rid of microorganisms.
  • Regardless of the specific sanitizer used, it is vital that water is sanitized using either one of these above ground pool chemicals to keep swimmers safe.

If you need professional pools services in Miami, call only the Miami Pool Experts at 305-9723474.

Click here if you want to read more about Swimming Pool Chemicals.